MODEL BO-2CV/4000

DOUBLE SCREWED COLUMN + CYLINDER COMBINED CLAMPING INNER RADIAL SEAL + PROPORTIONAL PRESS CONTROL.

Horizontal test rig with COMBINED clamping style. Both style are available: Bore plugs & Proportional press clamping.
Max reaction power 4000 TON. Basement is equipped with two special low profile lifters able to support valve up to 120 ton . The mobile reaction bridge is moved by two screwed columns that assure the complete absence of external forces on valve body in case of "bore plugs" clamping style.
An hydraulic cylinder installed on the fixed bridge allows tests on flanged valves, using proportional modulation of clamping effort. This prerogatives makes it compliant to the most widespread international test standards.
A water vessel is installed in the basement as water reservoir for test procedures. The rig is controlled by SKA-1000 / SKM-1000 pressurization skid; to have more information about please consult dedicated technical data sheets.
The rig could be completed with several options and accessories.
Valve test bench, banchi di prova per valvole, test rig - MODEL BO-2CV/4000
 
Valve test bench, banchi di prova per valvole, test rig - MODEL BO-2CV/4000

* Working limits for SHELL TEST with INNER RADIAL SEAL and PROPORTIONAL PRESS CLAMPING

  DN 20" 24" 26" 28" 30" 32" 34" 36" 40" 42" 48" 50" 52" 56" 60" 64" 68" 72";
ANSI-150  TON                                    
ANSI-300  TON                                    
ANSI-600  TON                                    
ANSI-900  TON                                    
ANSI-1500  TON                                    
ANSI-2500  TON                                    

*Note: Showed data have been calculated considering Shell test pressure and nominal bore size according to API-6D.
For further details please contact our technical department.



Reaction force 4000 TON (10% minimum press clamping)
(See working limits table)
Length max 3800 mm
Length min 0 mm
Column inner clearance 2800 mm
Flow axis height 2000 mm
Basement water vessel optional
Lifters 2 x 30 TON (standard asset)
Terminations allowed BW, SW, RF, RJ
Clamping style Type 3 - Combined
Dimensions 8050 (L) x 4330 (P) x 3245 (H) mm