MODEL BO30-2CV/750

Horizontal test rig with combined clamping style: inner radial seal and press clamping facilities. Designed to test control valves up to 32" according to FCI 70-2 and DIN EN 12266 standards. The mobile reaction bridge is moved by two screwed columns that assure complete absence of external forces on valve body an hydraulic cylinder can make press clamping with or without proportional control. This prerogative makes it compliant to the most widespread international test standards.
A water vessel is installed in the basement as water reservoir for test procedures.
The rig is controlled by SKA-100 pressurization skid with control valve asset devices.
Please contact our sales office to have more information.
Valve test bench, banchi di prova per valvole, test rig - MODEL BO30-2CV/750

* Working limits for SHELL TEST with INNER RADIAL SEAL and PROPORTIONAL PRESS CLAMPING

 

     
  DN 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32"
ANSI-150 TON                          
ANSI-300 TON                          
ANSI-600 TON                          
ANSI-900 TON                          
ANSI-1500 TON                          
ANSI-2500 TON                          




Reaction force 750 TON (10% minimum press clamping)
(See working limits table)
Valve lenght max 2200mm
Valve lenght min 0mm
Column inner clearance 1500mm
Flow axes height 1350mm from soil
Basement water tank 950 Liters
Lifters 2x10 TON
Terminations allowed BW, SW, RF, RJ
Clamping style Type 3 – Combined
Dimensions 4630(L) x 2300 (P) x 2170(H)