MODEL BV-3CV/240SH

Vertical test rig with combined clamping style.
It has 3 test places available with combined clamping.
With the hydraulic cylinder (bottom side), operators can test flanged valves with proportional controlled press clamping, where the press force is automatically controlled according to the water pressure inside valves, and the result load is reduced to minimal terms.
With the screwed columns you can test BW, SW termination using these inner radial seal.
The combination of these two different clamping styles makes the rig suitable for all valve kinds.
Each station has its own loading tray that simplifies loading procedure of Nr. 3 independents units.
The unit could be controlled by a SKA-100 pressurization skid.
Valve test bench, banchi di prova per valvole, test rig - MODEL BV-3CV/240SH

* Working limits for SHELL TEST with INNER RADIAL SEAL and PROPORTIONAL PRESS CLAMPING
     
  DN 1/2'' 1'' 2'' 2'' 1/2 3'' 4'' 5'' 6'' 8'' 10'' 12''
ANSI-150 TON                      
ANSI-300 TON                      
ANSI-600 TON                      
ANSI-900 TON                      
ANSI-1500 TON                      
ANSI-2500 TON                      



  240 TON (10% minimum press clamping)
3x80 TON
(See working limits table)
 Reaction force (total)
 
Valve Length max 1000mm
Valve Length min 150mm
Loading Height 1100mm
Distance between places 580mm
Basement water vessel 400 Liters
Terminations allowed BW, SW, RF, RJ
Clamping style Type 3 - Combined
Clamping force control Automatic within 5..100% interval, proportional to the hydrostatic pressure inside the valve under test. Reg. gain controlled by the operator
Loading tray length 500mm
Reference standard ISO, DIN, API, ANSI, ASTM, FCI, BS(Other on request)