MODEL BV-5CV/100P

Vertical test rig with inner radial seal clamping style.
It has 5 test places with combined clamping.
With the hydraulic cylinder (bottom side), operators can test flanged valves with proportional controlled press clamping, where the press force is automatically controlled according to the water pressure inside the valve, and the result load is reduced to minimal terms.
With the screwed columns it can test BW,SW terminations using the inner radial seal.
The combination of these two different clamping styles makes the rig suitable for all valve kinds.
The unit could be controlled by a SKA-100 pressurization skid.
Valve test bench, banchi di prova per valvole, test rig - MODEL BV-5CV/100P

* Working limits for SHELL TEST with INNER RADIAL SEAL and PROPORTIONAL PRESS CLAMPING
     
  DN 1/2'' 1'' 2'' 2'' 1/2 3'' 4'' 5'' 6''
ANSI-150 TON                
ANSI-300 TON                
ANSI-600 TON                
ANSI-900 TON                
ANSI-1500 TON                
ANSI-2500 TON                

 

Reaction force 100 TON (10% minimum press clamping)
5x20 TON (See working limits table)
Valve Length max 500mm
Valve Length min 50mm
Center to center distance 300mm
Loading height 1000mm
Basement water vessel 200 Liters
Terminations allowed BW, SW, RF, RJ
Clamping style Type 3 - Combined
Clamping force control Automatic within 5..100% interval , proportional to the hydrostatic pressure inside the valve under test.
Reg. gain controlled by the operator
Dimensions (mech) 2106 (L) x 1420 (D) x 2536 (H) (skid not included)