MODEL BVR-M/90

Test rig with claws clamping. Test of Pressure safety valves (PSV) Pressure relieve valves and breather According API-527 test standard.

Clamping of RF or RTJ valve could be executed in the real working conditions. The clamping is hydraulic on/off type. The auto-centering movement and plateau tilting is controlled hydraulically or pneumatically (as option).

Up to 12" / 16" / 24" rig size and 90 Ton clamping force. Test operation is performed by SKMM-100 pressurization SKID with GAS/Water pressure up to 10000 PSI & vacuum up to -0,9 bar. High capacity surge tank to measure POP pressure, with adequate seat lift. LVDT position transducer is available to measure seat position . Acoustic detection of valve leak is available as well. Computer registration system with software TestREC4.8/M can record detailed real time data about simmer point, Pop pressure, Re-seat pressure , blow-down entity, Seat lift and leakage rate. Testing stand can be surrounded by armored bullet proof protection perimeter to improve operators safety during Testing operations.
Valve test bench, banchi di prova per valvole, test rig - MODEL BR-M/90

2x75 TON
   
DN 2" 4" 6" 8" 10" 12" 14" 16"
ANSI-150                
ANSI-300                
ANSI-600                
ANSI-900                
ANSI-1500                
ANSI-2500                
ANSI-4500                


Reaction force (See working limits table) 90 TON(90000 Kg)
Ø flange max 530 / 650 / 860mm
Ø flange min 90mm
Flange thickness max 140mm
Tilt angle -5 .. +95°
Basement water tank 200l
Terminations allowed RF, RJ
Clamp type Hydraulic cylinder w/claws
Clamping force control On/Off typeRange 10..100 ton
Reference standard ISO, DIN, API, ANSI, ASTM, FCI, BS(Other on request)
Pneumatic supply 6.5 bar @ 1100 Nl/minDry air not lubricated
Electrical supply 3PH + T380V@50Hz, 2KW
Dimensions 1465(L) x 2100(P) x 1900(H)