MODEL BV-M/60

Test rig with claws clamping. Test of Pressure safety valves (PSV) Pressure relieve valves and breather According API-527 test standard.

Clamping of RF or RTJ valve could be executed in the real working conditions. The clamping is hydraulic on/off type. The auto-centering movement is controlled hydraulically or pneumatically (as option).

Up to 12" / 16" / 24" rig size and 90 Ton clamping force. Test operation is performed by SKMM-100 pressurization SKID with GAS/Water pressure up to 10000 PSI & vacuum up to -0,9 bar. High capacity surge tank to measure POP pressure, with adequate seat lift. LVDT position transducer is available to measure seat position . Acoustic detection of valve leak is available as well. Computer registration system with software TestREC4.8/M can record detailed real time data about simmer point, Pop pressure, Re-seat pressure , blow-down entity, Seat lift and leakage rate. Testing stand can be surrounded by armored bullet proof protection perimeter to improve operators safety during Testing operations.
Valve test bench, banchi di prova per valvole, test rig - MODEL BV-M/60
MODEL BV-M/60

NEW PSV test stand up to 90TON reaction power & 700 bar GAS pressure test

BV-M/60P

   
DN ½" 1" 2" 3" 4" 5" 6" 8" 10" 12"
ANSI-150                    
ANSI-300                    
ANSI-600                    
ANSI-900                    
ANSI-1500                    
ANSI-2500                    


Reaction force (See working limits table) 60 TON(60000 Kg)
Ø flange max 530 / 650 / 860mm
Ø flange min 90mm
Flange thickness max 90mm
Tilt angle FIXED (no tiltable)
Basement water tank 200l
Terminations allowed RF, RJ
Clamp type Hydraulic cylinder w/claws
Clamping force control On/Off typeRange 10..100 ton
Reference standard ISO, DIN, API, ANSI, ASTM, FCI, BS(Other on request)
Pneumatic supply 6.5 bar @ 1100 Nl/minDry air not lubricated
Electrical supply 3PH + T380V@50Hz, 2KW
Dimensions 1250(L) x 700P) x 1250(H)