MODEL BV-M/90

Test rig with claws clamping. Test of Pressure safety valves (PSV) Pressure relieve valves and breather According API-527 test standard.

Clamping of RF or RTJ valve could be executed in the real working conditions. The clamping is hydraulic on/off type. The auto-centering movement is controlled hydraulically or pneumatically (as option).

Up to 12" / 16" / 24" rig size and 90 Ton clamping force. Test operation is performed by SKMM-100 pressurization SKID with GAS/Water pressure up to 10000 PSI & vacuum up to -0,9 bar. High capacity surge tank to measure POP pressure, with adequate seat lift. LVDT position transducer is available to measure seat position . Acoustic detection of valve leak is available as well. Computer registration system with software TestREC4.8/M can record detailed real time data about simmer point, Pop pressure, Re-seat pressure , blow-down entity, Seat lift and leakage rate. Testing stand can be surrounded by armored bullet proof protection perimeter to improve operators safety during Testing operations.
Valve test bench, banchi di prova per valvole, test rig - MODEL BV-M/90
DN 2" 4" 6" 8" 10" 12" 14" 16"
ANSI-150         
ANSI-300         
ANSI-600         
ANSI-900         
ANSI-1500         
ANSI-2500         
ANSI-4500         


Reaction force (See working limits table)90 TON(90000 Kg)
Ø flange max530 / 650 / 860mm
Ø flange min90mm
Flange thickness max140mm
Tilt angleFIXED (no tiltable)
Basement water tank200l
Terminations allowedRF, RJ
Clamp typeHydraulic cylinder w/claws
Clamping force controlOn/Off typeRange 10..100 ton
Reference standardISO, DIN, API, ANSI, ASTM, FCI, BS(Other on request)
Pneumatic supply6.5 bar @ 1100 Nl/minDry air not lubricated
Electrical supply3PH +T380V@50Hz, 2KW
Dimensions1465(L) x 2100(P) x 1900(H)