MODEL BOR-1V/250 / BOR-CV/250

BORE PLUGS OR COMBINED CLAMPING
W/90° TILT BILITY

Horizontal test rig with "bore plug" clamping or "combined clamping".
The mobile reaction bridge is moved by one screwed column that assures the complete absence of external forces on valve body with bore plugs clamping, or perform a "face to face" sealing using proportional press clamping style.
This prerogative makes it compliant to the most widespread international test standards. Besides, valve flow axes can be tilted by 90° according to the test position preferred by customer.
In the basement a water vessel in installed as water reservoir for test procedures. The test process is controlled by a SKA-100 pressurization skid.
 
Note: Safety perimetric protection available as option - Bunker or Pit assembly asset available as option.
valve test bench BOR-1V/250
  
Working limits PRESS CLAMPING and BORE PLUGS CLAMPING

  DN 4" 6" 8" 10" 12" 14" 16" 18" 20" 22" 24"
ANSI-150 TON                      
ANSI-300 TON                      
ANSI-600 TON                      
ANSI-900 TON                      
ANSI-1500 TON                      
ANSI-2500 TON                      


Reaction force

BOR-1V/250

250 TON
(see working limits table)

BOR-CV/250

250 TON
(see working limits table)

Valve Length max 1500 mm 1300 mm
Valve Length min 200 mm 0 mm
Columns inner clearance 1100 mm 1100 mm
Flow axes height in horizontal position 720 mm 720 mm
Loading height in vertical position 1020 mm 1220 mm
Basement water vessel 300 Liters 300 Liters
Termination allowed BW, SW, RF, RTJ BW, SW, RF, RTJ
Clamping style Type 2 – bore plugs Type 3 – Combined
Dimensions (mech) Horizontal 2120(L) x 3970(P) x 970(H) 2120(L) x 2900(P) x 970(H)
Dimensions (mech) Vertical 2120(L) x 2900(P) x 3300/4100(H) 2120(L) x 2900(P) x 3300/4100(H)