MODEL BOR-1V/200

BORE PLUGS CLAMPING w/90° TILT BILITY

Horizontal test rig with bore plug clamping style: inner radial seal facilities.
The mobile reaction bridge is moved by one screwed column that assures complete absence of external forces on valve body.
This prerogative makes it compliant to the most widespread international test standards.
Besides, valve flow axes can be tilted by 90° according to test position preferred by the customer.
A water vessel in installed in the basement as water reservoir for test procedures.
The test process is controlled by SKA-100 pressurization SKID.
See dedicate literatures for further details.
Valve test bench, banchi di prova per valvole, test rig - MODEL BOR-1V/200
Valve test bench, banchi di prova per valvole, test rig - MODEL BOR-1V/200 Valve test bench, banchi di prova per valvole, test rig - MODEL BOR-1V/200 Valve test bench, banchi di prova per valvole, test rig - MODEL BOR-1V/200

* Working limits for SHELL TEST with INNER RADIAL SEAL and PROPORTIONAL PRESS CLAMPING
 
  DN 4" 6" 8" 10" 12" 14" 16" 18" 20"
ANSI-150 TON                  
ANSI-300 TON                  
ANSI-600 TON                  
ANSI-900 TON                  
ANSI-1500 TON                  
ANSI-2500 TON                  



Reaction force 200 TON
(see working limits table)
Length max 1000 mm
Length min 100 mm
Columns inner clearance 900 mm
Loading height Horizontal 720 mm / Vertical 1020 mm
Rotation angle 90°
Basement water vessel 600 Liters
Termination allowed RF, RTJ, BW, SW
Clamping style Type 2 – bore plugs
Dimensions (mech) Horizontal : 1920(L) x 3500(D) x 970(H) mm
Vertical : 2500(L) x 2820(D) x 3700(H) mm