Vertical test benches

MODEL BV-CCV/20P

Fully automatic vertical test rig with controlled pressing clamp; press force is automatically controlled according to the water pressure inside valves, and the result load is reduced to minimal terms.
It has a 90° hydraulic actuator that lets the valve move according to a test sequence.
The high resolution differential pressure drop leak detection system is used to measure leak rates according to DIN 12266-1 for GAS leakage.
A mobile loading plate makes loading operations simple.
A mobile vertical protection assures operators safety in case of seal blows.
An electronic PLC controls all test operations, and the operator has a LCD touch screen monitor to set-up test sequences.
Valve test bench, banchi di prova per valvole, test rig - MODEL BV-CCV/20P

* Working limits for SHELL TEST with INNER RADIAL SEAL and PROPORTIONAL PRESS CLAMPING
 
  DN 50'' 100'' 125'' 150'' 200''
PN-10 TON          
PN-16 TON          
PN-25 TON          
PN-40 TON          
PN-64 TON          
PN.100 TON          

 

Reaction force 20 TON (10% minimum press clamping)
(see working limits table)
Valve Length max 505mm
Valve Length min 30mm
Loading height 900mm
Water vessel External 220 Liters
Terminations allowed BW, SW, RF, RJ
Clamping style Type 3 - Combined
Clamping force control Automatic within 10..100% interval, proportional to the hydrostatic pressure inside the valve under test. Reg. gain controlled by the operator.
Hydraulic test H2O w/oil 5% , 3-40bar(200bar, 650bar, as option)
Pneumatic test 0,5 - 6 bar
Pneumatic supply 6.5 bar @ 1100 Nl/min - Dry air not lubricated
Electric supply 3PH + T, 400V@50Hz, 5KW
Dimensions (mech) 1550(L) x 1050(D) x 2250(H)