MODEL BV-PMC/200-2

Vertical test rig with controlled pressing clamp; press force is automatically controlled according to the water pressure inside valves, and the result load is reduced to minimal terms.
The mobile upper side bridge allows vertical loading of valves and the possibility to have double working stands; while the first is working, the second could be prepared for the next valves.
A water vessel is installed in the basement as water reservoir for test procedures.
This rig could be completes with several options and accessories, please contact our sales office to have more information.
Valve test bench, banchi di prova per valvole, test rig - MODEL BV-PMC/200-2

* Working limits for SHELL TEST with PROPORTIONAL PRESS CLAMPING

  DN 100 150 200 250 300 350 400 450 500 600 700 800 900
PN-10 TON                          
PN-16 TON                          
PN-20 TON                          
PN-25 TON                          
PN-40 TON                          
PN-64 TON                          
PN-100 TON                          


Reaction force 200 TON (10% minimum press clamping)
(see working limits table)
Working stands 2
Valve length max 970 mm
Valve length min 100 mm
Columns inner clearance 1200 mm
Loading height 900 mm
Bridge course 900 mm
Basement water vessel 200 Liters
Terminations allowed RF, RJ
Clamping style Type 1 – Proportional Compression
Clamping force control Automatic within 10..100% interval, proportional to the hydrostatic
pressure inside the valve under test
Dimensions (mech) 1600(L) x 1900(P) x 3000(H)