Vertical test rig with controlled pressing clamp; press force is automatically controlled according to the water pressure inside valves, and the result load is reduced to minimal terms.
The mobile upper side bridge allows vertical loading of valves and the possibility to have double working stands; while the first is working, the second could be prepared for the next valves.
In the basement there is a water vessel and an external water vessel could be added as option.
The use of an open castle as an upper side reaction structure allows the user to make visual inspections of valve seats during the test.
The rig has an armored steel protection on sides.
The front side can be closed by a mobile horizontal sliding gate (optional).
A marketing machine is connected directly to control PLC to mark serial numbers on tested pieces.
The rig is controlled by a SKA-100 pressurization skid; to have more information about it please consult dedicate technical data sheets.
The rig could be completed with several options and accessories, please contact our sales office to have more information.
Valve test bench, banchi di prova per valvole, test rig - MODEL BV-PMC/200SP


  DN 4" 6" 8" 10" 12" 14" 16" 18" 20"
ANSI-150 TON                  
ANSI-300 TON                  
ANSI-600 TON                  
ANSI-900 TON                  
ANSI-1500 TON                  
ANSI-2500 TON                  

Reaction force 200 TON (10% minimum press clamping)
(See working limits table)
Valve length max 450 mm
Valve length min 50mm
Column inner clearance 650mm
Loading height 900mm
Bridge course 600mm
Basement water vessel 100 Liters
Termination allowed RF, RTJ
Clamping style Type: 1 - Proportional press clamping
Clamping force control Automatic within 5%-100% interval, proportional to
hydrostatic pressure inside the valve under test.
Protection against water jet armored steel 3 side + mobile front door
Dimensions (Mech) 1100(L) x 1325 (P) x 2020 (H)