MODEL BOT45-2V/250

Test rigs for pipes with clamping style Nr. 2 "Inner radial seal" or Nr. 8 "Overpressure auto-adaptive seals" for elliptical shape error. Reaction bridges are connected by screwed columns that allow to set up maximum pipe length.
The right side reaction bridge is able to run on the entire columns length to cover a wide range of pipe length measures as described in the technical table below.
Pipe loading is performed by a crane form the top or horizontally, while Nr.2 hydraulic "V" shape lifters will support it for the entire test duration and are able to center the alignment on seals heads.
The basement includes a water vessel with an evaporation limitation device (on request). The test benches does not need any foundations. The rig is controlled by a SKA class pressurization skid with 120 L/min water filling ability.
To have more information about it, please consult dedicated technical data sheets. The rig could be completed with several options and accessories, besides it is fully customizable according to client preferences.
valve test bench BOT45-2V/250

DN (mm) 114 141 168 219 273 324 356 406 457 508 559 610 660
bar 1380 1276 899 531 342 243 201 154 122 99 82 69 58

DN (inchi) 4 5 6 8 10 12 14 16 18 20 22 24 26
bar 20000 18503 13042 7696 4957 3521 2921 2237 1767 1432 1183 994 847


Note: Safety perimetric protection available as option - Bunker or Pit assembly asset available as option.

Reaction force 250 TON
(See working limits table)
Pipe length max 7200 mm
Pipe length min 2500 mm
PIPE max Diameter 700 mm
Flow axes height 1200 mm
Basement water vessel MAX 3000 Liters
Lifter See Option
Screw Dust Protection See Option
Terminations allowed BW, SW, RF, RJ
Clamping style Type 2 – Bore Plugs
Type 8 – Auto adaptive seals
Dimensions 8850 (L) x 1580 (P) x 2000 (H)