MODEL BV-3CV/60P

COMBINED CLAMPING 
W/PROPORTIONAL PRESSING CONTROL

Three test station vertical test bench with combined clamping. Valve length adjustment is performed by an upper side screwed column moved by an hydraulic gear.
This assures the complete absence of external forces on valve body in case of bore plugs clamping. On the bottom side a proportionally controlled pressing cylinder makes face-to-face sealing available.
This asset makes the test bench compliant to the most widespread testing standards. Perator safety is granted by full surrounding protection guarding with bullets proof crystal to offer perfect visual inspection.
The opening of system to reduce operator risk exposure to minimum terms. Test process is controlled by a SKA-100 pressurization SKID.
 
Note: Assembly example with full surrounding protection guarding
valve test bench BV-3CV/60Pvalve test bench BV-3CV/60P

* Working limits for SHELL TEST with INNER RADIAL SEAL and PROPORTIONAL PRESS CLAMPING
 
  DN ½" 1" 2" 3" 4"
ANSI-150 TON          
ANSI-300 TON          
ANSI-600 TON          
ANSI-900 TON          
ANSI-1500 TON          
ANSI-2500 TON          

 

Reaction force 3 x 20 TON
(See working limits table)
Valve length max 500 mm
Valve length min 0 mm
Max flange diameter 350 mm
Loading height from the ground 850 mm
Terminations allowed RF, RTJ, BW, SW
Clamping style Type 3 – Combined
Dimensions (mech) 1950 (L) x 1400 (D) x 2400 (H)