Vertical test benches
MODEL BV-CCV/15P
Vertical test rig with an automatic test sequence.
Combined clamping style: proportional press clamping and inner radial seals.
A protection against water jets surrounds the valve under test and it is automatically controlled with pneumatic cylinders.
A PLC controls test sequences that can be configured by a LCD touch screen.
Full automatic test cycles with leakage flan measuring (water fail) are available.
Combined clamping style: proportional press clamping and inner radial seals.
A protection against water jets surrounds the valve under test and it is automatically controlled with pneumatic cylinders.
A PLC controls test sequences that can be configured by a LCD touch screen.
Full automatic test cycles with leakage flan measuring (water fail) are available.
* Working limits for SHELL TEST with INNER RADIAL SEAL and PROPORTIONAL PRESS CLAMPING
| DN | 1" | 2" | 3" | 4" | 6" | 8" | |
| ANSI-150 | TON | ||||||
| ANSI-300 | TON | ||||||
| ANSI-600 | TON | ||||||
| ANSI-900 | TON | ||||||
| ANSI-1500 | TON | ||||||
| ANSI-2500 | TON |
| Reaction force | 15 TON (10% minimum press clamping) (See working limits table) |
| Valve length max | 590 mm |
| Valve length Min | 50mm |
| Loading heigh | 900mm |
| Water vessel | 300 Liters External |
| Termination allowed | BW. SW, RF, RTJ |
| Clamping style | Type: 3 – Combined: Proportional pressing & inner radial seal (bore plugs) |
| Clamping force control | Automatic within 10%-100% interval, proportional to hydrostatic pressure inside the valve under test. |
| Reference standards | ISO, DIN, API, ANSI, ASTM, FCI, BS (Other on request). |
| Hydraulic test | H2O 700 bar MAX |
| Pneumatic test | 0.5 bar – 6 bar |
| Pneumatic supply | 6.5 bar @ 1100 Nl/min - Dry air not lubricated |
| Electric supply | 3PH + T, 380V@50Hz, 5KW |
| Dimensions (mech) | 730 (L) x 1010 (D) x 2340 (H) mm |