MODEL BV-PMC/100-2P

Vertical test rig with controlled pressing clamp; the press force is controlled automatically according to the water pressure inside valves, and the result load is reduced to minimal terms.
The mobile upper side bridge allows vertical loading of valves and the possibility to have double working stand; while the first is working, the second could be prepared for other valves.
In the basement there is a water vessel and an external water vessel could be added as an option.
The use of a open castle as upper side reaction structure allows the user to make visual inspections of valve seats during the test.
The rig is controlled by SKA-100 pressurization skid; to have more information about it please consult dedicated technical data sheets.
The rig could be completed with several options and accessories, please contact our sales office to have more information.
Valve test bench, banchi di prova per valvole, test rig - MODEL BV-PMC/100-2P

Working limits for SHELL TEST with PROPORTIONAL PRESS CLAMPING

  DN 6" 8" 10" 12" 14" 16" 18" 20" 24"
ANSI-150 TON                  
ANSI-300 TON                  
ANSI-600 TON                  
ANSI-900 TON                  
ANSI-1500 TON                  
ANSI-2500 TON                  
ANSI-4500 TON                  


Reaction force 100 TON (10% minimum press clamping)
(See working limits table)
Working stands 2
Valve length max 650 mm
Vave length min 150 mm
Columns inner clearance 800 mm
Loading height 750 mm
Bridge course 900 mm
Basement water vessel 220 Liters
Terminations allowed BW, SW, RF, RJ
Clamping style Type 1 – Proportional press clamping
Clamping force control Automatic within 10..100% interval, proportional
to the hydrostatic pressure inside the valve under test
Dimensions (mech) 1360 (L) x 2842 (P) x 2770 (H) mm