MODEL BV-CC3V/60SH

INNER RADIAL SEAL (BORE PLUGS) OR P.E.A. ADAPTORS
W/AUTOMATIC 1/4 TURN VALVE ACTUATOR

Three station vertical test bench with combined "Bore plug" clamping.
Valve length adjustment is performed by an upper side screwed column moved by an hydraulic gear.
This assures complete absence of external forces on valve body.
Automatic ¼ turn actuators are included to operate the valve during test procedures and to perform endurance tests.
Operator safety is granted by full surrounding protection guarding with bullets proof crystal to offer perfect visual inspection.
The opening of the guarding is ruled by a control system to reduce operator risk exposure to minimum terms.
Test process is controlled by a PLC & LCD touchscreen.
Valve test bench, banchi di prova per valvole, test rig - MODEL BV-CC3V/60SH

Working limits for SHELL TEST with INNER RADIAL SEAL

  DN. 1/2" 1" 2" 3" 4" 6"
ANSI-150 TON            
ANSI-300 TON            
ANSI-600 TON            
ANSI-900 TON            
ANSI-1500 TON            
ANSI-2500 TON            

Reaction force (total) 60 TON
3 x 20 TON (See working limits table)
Valve Length max 460 mm
Valve Length min 50 mm
Max flange diameter 300 mm
Loading height from the ground 1100 mm
Actuator torque 120 Kgm
Actuator angle -15º / +75º
Basement water vessel 400 Liters
Terminations allowed RF, RTJ, BW, SW
Clamping style Type 2 Bore plugs - Type 7 P.E.A.
Dimensions (mech) 2366(L) x 1105(D) x 2500(H)