Test rigs for pipes with clamping style Nr. 1 "Proportional press".
Reaction bridges are connected by sector columns, that allow to set up maximum pipe length.
The fine adjustment on pipes is performed by pressing cylinder stroke.
The right side reaction bridge is able to run on the entire columns length to cover a wide range of pipe length measure, as described in the technical table below.
Pipe loading is performed by crane from the top, while Nr. 4 hydraulic "Lunette" lifters will support it for entire test duration and are able to center the alignment on seals heads, and "keep" it to avoid its bending during tests.
The basement includes a water vessel with an evaporation limit device.
The best bench does not need any foundations preparation.
The rig is controlled by SKA class pressurization skid up to 1000 L/min water filling ability.
To have more information about it please consult dedicated technical data sheets.
The rig could be completed with several options and accessories, besides it is fully customizable according to clients preferences.
Valve test bench, banchi di prova per valvole, test rig -  BOT-2CSC/1200, BOT-2CSV/1200

  BOT-2CSC/1200 BOT-2CSV/1200
Reaction power 1200 TON 1200 TON
Clamping style Type 1: Proportional pressing Type 2 -  external radial seals
Max pipe length 12500 mm 7100 mm
Min pipe length 2000 mm 1500 mm
Max pipe diameter 1250 mm 1020 mm
Allowed elliptical error 0,5% 0,5%
Flow axes height 1770 mm 1550 mm
Basement water vessel 14000 Liters 6000 Liters
Max Test pressure 700 / 1050 bar 700 / 1050 bar
Filling Flow 1000 Liters/min 500 Liters/min
Pre-filling vacuum 160 m /h 160 m /h
Pneumatic supply 6.5 bar @ 1500 Nl/min
Dry air not lubricated
6.5 bar @ 1100 Nl/min
Dry air not lubricated
Dimensions 15000(L) x 2720(P) x 2650(H) 9700(L) x 2500(P) x 2180(H)